无需繁琐的文字描述，观看我们的视频，让软管泵,【水渠机】工厂现货供应产品一览无余！


以下是:软管泵,【水渠机】工厂现货供应的图文介绍


石油钻井水处理泥浆石灰浆，采矿冶金的充填物料，矿浆输送，食品行业，油类物料及饮料，糊状料输送，造纸行业，纸浆输送，建筑业，水泥沙浆泡沫混凝土生产线，楼顶屋泡沫轻质流体物料。,便于维护。开始供气，压力要小。管壁壁厚不能小于mm。否则要立即不要把铁水浇在行走轮和链条上特别要打扫设备底下和拉紧装置处的铁块铁渣一台高质量的软管泵寿命在-年浇注铁水以前软管泵的设计者和使用者要看重的是它输送强研磨性介质的能力。                           




工业软管泵输油不足的可能原因及解决方法齿轮泵故障排除10个隔油环齿轮泵应能连续供油，齿轮啮合重叠系数应大于1。当一对齿轮未脱离啮合时，另一对齿轮已进入啮合状态。这样，当有两对齿轮同时啮合时，两对齿轮的齿啮合线之间形成一个封闭的体积，其中部分油也被困在其中。

Possible causes and solutions for insufficient oil delivery of industrial hose pumps. Gear pump troubleshooting. 10 oil-separating ring gear pumps should be able to supply oil continuously, and the gear meshing overlap factor should be greater than 1. When one pair of gears is not disengaged, the other pair of gears has entered the meshed state. In this way, when there are two pairs of gears meshing at the same time, a closed volume is formed between the tooth meshing lines of the two pairs of gears, and part of the oil is also trapped therein.

 




豫信致诚机械设备有限公司吸取和引进国内的先进技术与先进设备，汇集了一大批长期从事 湖北十堰路面抛丸机研究、应用的工程技术人才，整合技术、人才优势。




首先我们先介绍一下软管泵，软管泵又称蠕动泵。为了泵体污染流体或流体污染泵体的危险性，整个泵的装置中只有软管与介质接触。在一般场合下，软管泵使用的都是天然橡胶的软管。内层和外层都是完整光滑的天然橡胶，其目的是很强防磨损。适用于腐蚀性不高但磨损性很大的如泥浆以及无机物等等介质。而且一般适用于脂肪、油类或油脂的介质，以及有机化学物质。内层是橡胶，而外层是天然橡胶或者是复合橡胶。

First of all, lets introduce the hose pump, which is also called peristaltic pump. In order to eliminate the danger of the pump body contaminating the fluid or the fluid contaminating the pump body, only the hose in contact with the medium in the entire pump device. In general, hose pumps use natural rubber hoses. The inner and outer layers are completely smooth natural rubber, the purpose of which is to prevent abrasion. It is suitable for mediums that are not corrosive but very abrasive, such as mud and inorganic substances. And generally suitable for fats, oils or oils, and organic chemicals. The inner layer is rubber, while the outer layer is natural rubber or composite rubber.

 




点击查看豫信致诚机械设备有限公司的【产品相册库】以及我们的【产品视频库】